View AT043TN13_3643954.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

the copyright belongs to innolux. any unauthorized use is prohibited. inno l u x display corporation lcd module s p e c i f i c at i o n customer: model name: AT043TN13 v.10 spec no.: a043-13-tt-101 date: 2006/08/02 version: 02 preliminary specification final specification for customer s acceptance approved by comment approved by review ed by prepared by www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x the copyright belongs to innolux. any unauthorized use is prohibited. contents 1. general specifications ............................ ................................................... .......................... 1 2. pin assignment .................................... ................................................... ............................. 2 2.1. tft lcd panel driving section.................. ................................................... ................. 2 2.2. backlight unit section.......................... ................................................... ........................ 4 3. operation specifications .......................... ................................................... ......................... 5 3.1. absolute maximum rating........................ ................................................... ................... 5 3.1.1. typical operation conditions................. ................................................... .............. 6 3.1.2. current consumption ......................... ................................................... ................. 7 3.1.3. backlight driving conditions ................... ................................................... ............. 7 3.2. power sequence ................................. ................................................... ........................ 8 3.3. timing characteristics .......................... ................................................... ....................... 9 3.3.1. timing conditions ........................... ................................................... ..................... 9 3.3.2. timing diagram .............................. ................................................... ................... 11 4. touch screen panel specifications ................... ................................................... .............. 13 4.1. electrical characteristics ......................... ................................................... .................. 13 4.2. mechanical & reliability characteristics ........... ................................................... ......... 13 4.3. touch screen panel block......................... ................................................... ................ 14 4.4. touch screen panel pin definition ............... ................................................... ............. 14 5. optical specifications............................. ................................................... ......................... 15 6. reliability test items ........................... ................................................... ............................ 19 7. general precautions .............................. ................................................... ......................... 20 7.1. safety ........................................ ................................................... ................................ 20 7.2. handling ...................................... ................................................... .............................. 20 7.3. static electricity ............................... ................................................... .......................... 20 7.4. storage ....................................... ................................................... ............................... 20 7.5. cleaning ...................................... ................................................... .............................. 20 8. mechanical drawing................................ ................................................... ........................ 21 9. package drawing................................... ................................................... ......................... 22 www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 1/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 1. general specifications no. item specification remark 1 lcd size 4.3 inch(diagonal) 2 driver element a-si tft active matrix 3 resolution 480x3(rgb)x272 4 display mode normally white, transmissive 5 dot pitch 0.066(w)x0.198(h) mm 6 active area 95.04(w)x53.856(h) mm 7 module size 105.5(w)x67.2(h)x4.95(d) mm note 1 8 surface treatment anti-glare 9 color arrangement rgb-stripe 10 interface digital 11 backlight power consumption tbd 12 panel power consumption tbd 13 weight tbd note 1: refer to mechanical drawing. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 2/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 2. pin assignment 2.1. tft lcd panel driving section pin no. symbol i/o function remark 1 gnd p power ground 2 gnd p power ground 3 v dd p power supply 4 v dd p power supply 5 r0 i red data (lsb) 6 r1 i red data 7 r2 i red data 8 r3 i red data 9 r4 i red data 10 r5 i red data 11 r6 i red data 12 r7 i red data (msb) 13 g0 i green data (lsb) 14 g1 i green data 15 g2 i green data 16 g3 i green data 17 g4 i green data 18 g5 i green data 19 g6 i green data 20 g7 i green data (msb) www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 3/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 21 b0 i blue data (lsb) 22 b1 i blue data 23 b2 i blue data 24 b3 i blue data 25 b4 i blue data 26 b5 i blue data 27 b6 i blue data 28 b7 i blue data (msb) 29 gnd p power ground 30 pclk p pixel clock 31 disp i display on/off 32 hsync i horizontal sync signal 33 vsync i vertical sync signal 34 de i data enable 35 av dd p power supply (+5v) 36 av dd p power supply (+5v) 37 nc - no connection 38 nc - no connection 39 gnd p power ground 40 gnd p power ground i: input, o: output, p: power www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 4/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 2.2. backlight unit section pin no. symbol i/o function remark 1 vled 1- p ground (cathode) 2 vled 2- p ground (cathode) 3 vled 2+ p led input terminal (anode) 4 vled 1+ p led input terminal (anode) www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 5/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 3. operation specifications 3.1. absolute maximum rating ( gnd=av ss =0v, note 1) values item symbol min. max. unit remark v dd -0.3 6.0 v power voltage av dd -0.3 6.0 v input signal voltage logic input -0.3 v dd +0.3 v operation temperature t op (-20) (70) storage temperature t st (-30) (80) note 1: the absolute maximum rating values of this pr oduct are not allowed to be exceeded at any times. should a module be used with a ny of the absolute maximum ratings exceeded, the characteristics of the modu le may not be recovered, or in an extreme case, the module may be p ermanently destroyed. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 6/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.1.1. typical operation conditions (gnd=av ss =0v, note 1) values item symbol min. typ. max. unit remark 2.3 2.5 2.7 v v dd 3.1 3.3 3.5 v note 2 power voltage av dd 4.8 5.0 5.2 v input logic high voltage v ih 0.7v dd - v dd v input logic low voltage v il 0 - 0.3v dd v note 1: be sure to apply v dd and v gl to the lcd first, and then apply v gh . note 2: you should choose only one from the typical val ues of v dd . www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 7/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.1.2. current consumption (gnd=av ss =0v) values item symbol min. typ. max. unit remark i dd - tbd tbd ma v dd =2.5v current for driver iav dd - tbd tbd ma av dd =5.0v 3.1.3. backlight driving conditions values item symbol min. typ. max. unit remark led voltage v l - 19.8 21.0 v note 2 led current i l - (16) - ma note 2 led life time - 20,000 - - hr note 1 note 1: the led life time is defined as the module brightness decrease to 50% original brightness that the ambient temperature is 25 and i l =16ma. note 2: the led driving condition is defined for each led module (6 led serial). www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 8/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.2. power sequence to prevent a latch-up or dc operation of the lcd mo dule, the power on/off sequence should be as the diagram below. symbol specification symbol specification t1 0 t1 10 msec Q Q t5 0 t5 160 msec Q Q t2 0 t2 100 msec Q Q t6 160 msec t6 Q t3 0 t3 50 msec Q Q t7 160 msec t7 Q t4 0 t4 10 msec Q Q t8 1 msec t8 Q www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 9/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.3. timing characteristics 3.3.1. timing conditions (ta = 25 , vdd = 2.3v~ 3.5v, gnd = 0v) values item symbol min. typ. max. unit remark clock cycle 1/t c - 9.00 15 mhz hsync cycle 1/f h - 17.14 - khz vsync cycle 1/f v - 59.94 - hz horizontal signal t h - 525 - clk note 1 horizontal display period t hd - 480 - clk horizontal front porch t hf 2 - - clk note 2 horizontal pulse width t hp 2 41 - clk note 2 horizontal back porch t hb 2 - - clk note 2 vertical cycle t v - 286 - h vertical display period t vd - 272 - h vertical front porch t vf 2 2 - h vertical pulse width t vp 2 10 - h vertical back porch t vb 2 2 - h disp setup time t diss 10 - - ns disp hold time t dish 10 - - ns clock period pw clk 66.7 - - ns clock pulse high period pwh 26.7 - - ns clock pulse low period pwl 26.7 - - ns hsync setup time t hs 10 - - ns hsync hold time t hh 10 - - ns www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 10/22 the copyright belongs to innolux. any unauthorized u se is prohibited. data setup time t ds 10 - - ns data hold time t dh 10 - - ns de setup time t des 10 - - ns de hold time t deh 10 - - ns vsync setup time t vhs 10 - - ns vsync hold time t vhh 10 - - ns note 1: t hd =480clk, t hf = 2clk, t hp = 41clk, t hb = 2clk 525clk=480clk + 2clk + 41clk + 2clk note 2: t hf + t hp + t hb 44 clk www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 11/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 3.3.2. timing diagram t v t vd t vf t vb t vp vsync hsync de hsync hsync de de dn7- dn0 dn7- dn0 clk invalid invalid invalid invalid 1st line 2nd line 3rd line 4th line 5th line last line t h t hp t hb t hd t hf 1/tc 1st pixel 2nd pixel last pixel www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 12/22 the copyright belongs to innolux. any unauthorized u se is prohibited. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 13/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 4. touch screen panel specifications 4.1. electrical characteristics value item min. typ. max. unit remark linearity -1.5 - 1.5 % analog x and y directions 100 - 900 ? x(film side) terminal resistance 100 - 900 ? y(glass side) insulation resistance 25 - - m? dc 25v voltage - 5 7 v dc chattering - - 10 ms 100k? pull-up transparency 79 - - % jis k7105 note: do not operate it with a thing except a polyace tal pen (tip r0.8mm or less) or a finger, especially those with hard or sharp tips such as a ball po int pen or a mechanical pencil. 4.2. mechanical & reliability characteristics value item min. typ. max. unit remark activation force 80 - - g note 1 durability-surface scratching write 100,000 - - characters note 2 durability-surface pitting 1,000,000 - - touches note 3 surface hardness 3 - - h jis k5400 note 1: stylus pen input: r0.8mm polyacetal pen or fi nger. note 2: measurement for surface area. -scratch 100,000 times straight line on the f ilm with a stylus change every 20,000 www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 14/22 the copyright belongs to innolux. any unauthorized u se is prohibited. times. -force: 250gf. -speed: 60mm/sec. -stylus: r0.8 polyacetal tip. note 3: pit 1,000,000 times on the film with a r0.8 silicon rubber. -force: 250gf. -speed: 2times/sec. 4.3. touch screen panel block 4.4. touch screen panel pin definition pin no. symbol i/o function remark 1 y2 top top electrode C differential analog 2 x2 left left electrode C differential analog 3 y1 bottom bottom electrode C differential analog 4 x1 right right electrode C differential analog top view www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 15/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 5. optical specifications values item symbol condition min. typ. max. unit remark l =180(9 oclock) (60) (70) - r =0(3 oclock) (60) (70) - t =90(12 oclock) (40) (50) - viewing angle (cr 10) b =270(6 oclock) (60) (70) - degree note 1 t on - (10) (20) msec note 3 response time t off - (15) (30) msec note 3 contrast ratio cr (400) (500) - - note 4 w x (0.26) (0.31) (0.36) - color chromaticity w y (0.28) (0.33) (0.38) - note 2 note 5 note 6 l 1 (230) (280) - cd/m2 note 6 (with touch screen) luminance l 2 (300) (350) - cd/m2 note 6 (without touch screen) luminance uniformity y u normal ==0 70 75 - % note 7 test conditions: 1. v dd =3.3v, i l =16ma (backlight current), the ambient temperature is 2 5 . 2. the test systems refer to note 2. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 16/22 the copyright belongs to innolux. any unauthorized u se is prohibited. note 1: definition of viewing angle range fig. 4-1 definition of viewing angle note 2: definition of optical measurement system . the optical characteristics should be measure d in dark room. after 30 minutes operation, the optical properties are measured at the center point of the lcd screen. (response time is measured by photo detector topcon bm-7 , other items are measured by bm-5a/field of view: 1 /height: 500mm. ) fig. 4-2 optical measurement system setup normal line ==0 normal line ==0 photo detector =90 12 oclock direction =270 6 oclock direction =0 =180 active area 500mm =90 12 oclock direction =270 6 oclock direction =0 =180 active area l t b r www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 17/22 the copyright belongs to innolux. any unauthorized u se is prohibited. note 3: definition of response time the response time is defined as the lcd optical switching time interval between white state and black state. rise time (t on ) is the time between photo detector output intensity changed from 90% to 10%. and fall ti me (t off ) is the time between photo detector output intensity changed from 10% to 9 0%. fig. 4-3 definition of response time note 4: definition of contrast ratio state black" " the on lcd when measured luminance state white" " the on lcd when measured luminance (cr) ratio contrast = note 5: definition of color chromaticity (cie1931 ) color coordinates measured at center point of lcd. note 6: all input terminals lcd panel must be gr ound while measuring the center area of the panel. 100% 90% 10% 0% photo detector output (relative value) t on t off white (tft off) black (tft on) white (tft off) www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 18/22 the copyright belongs to innolux. any unauthorized u se is prohibited. note 7: definition of luminance uniformity active area is divided into 9 measuring areas (refer t o fig. 4-4 ).every measuring point is placed at the center of each measur ing area. max min b b (yu) uniformity luminance = l-------active area length w----- active area widt h w w/3 w/3 w/6 l/3 l/3 l/6 l fig. 4-4 definition of measuring points b max : the measured maximum luminance of all measurement po sition. b min : the measured minimum luminance of all measurement po sition. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 19/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 6. reliability test items (note3) item test conditions remark high temperature storage ta = (80 ) 240 hrs note 1 low temperature storage ta = (-30 ) 240hrs note 1 high temperature operation ts = (70 ) 240hrs note 2 low temperature operation ta = (-20 ) 240hrs note 1 operate at high temperature and humidity +40 , 90%rh 240 hrs thermal shock -30 /30 min ~ + 80 /30 min for a total 100 cycles, start with cold temperature and end with high temperature vibration test frequency range:10~55hz stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x. y. z. (6 hours for total) mechanical shock 100g 6ms,x, y, z 3 times for each direction package vibration test random vibration : 0.015g*g/hz from 5-200hz, -6db/octave from 200-500hz 2 hours for each direction of x. y. z. (6 hours for total) package drop test height:60 cm 1 corner, 3 edges, 6 surfaces electro static discharge 2kv, human body mode, 100pf /1500? note 1: ta is the ambient temperature of samples. note 2: ts is the temperature of panels surface. note 3: in the standard condition, there shall b e no practical problem that may affect the display function. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 20/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 7. general precautions 7.1. safety liquid crystal is poisonous. do not put it in your mouth . if liquid crystal touches your skin or clothes, wash it off immediately by using soap and water. 7.2. handling 1. the lcd panel is plate glass. do not subject the pane l to mechanical shock or to excessive force on its surface. 2. the polarizer attached to the display is easily da maged. please handle it carefully to avoid scratch or other damages. 3. to avoid contamination on the display surface, do no t touch the module surface with bare hands. 4. keep a space so that the lcd panels do not touch o ther components. 5. put cover board such as acrylic board on the surface of lcd panel to protect panel from damages. 6. transparent electrodes may be disconnected if you use the lcd panel under environmental conditions where the condensation of de w occurs. 7. do not leave module in direct sunlight to avoid malfunction o f the ics. 7.3. static electricity 1. be sure to ground module before turning on power or operating module. 2. do not apply voltage which exceeds the absolute maxi mum rating value. 7.4. storage 1. store the module in a dark room where must keep at 2510 and 65%rh or less. 2. do not store the module in surroundings contai ning organic solvent or corrosive gas. 3. store the module in an anti-electrostatic container or bag. 7.5. cleaning 1. do not wipe the polarizer with dry cloth. it migh t cause scratch. 2. only use a soft sloth with ipa to wipe the polarize r, other chemicals might permanent damage to the polarizer. www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 21/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 8. mechanical drawing www.datasheet.co.kr datasheet pdf - http://www..net/
i nno l u x spec no.: a043-13-tt-101 page: 22/22 the copyright belongs to innolux. any unauthorized u se is prohibited. 9. package drawing tbd www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of AT043TN13

	To Download AT043TN13 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .